So I recently bought a new controller after realizing I had some issues with the older one. Within the last week I have noticed, with both the old and new controller, that I was over aiming or over rotating. EXAMPLE: When I look left then right then back left I notice an entire 90 degree turn after I blatantly let off the sticks. I had tested both my normal (6 or 7) and 1 sensitivity to see if there was a difference, which there wasn't. The issue is when moving back and fourth on the x axis I notice every 3 to 5 seconds my reticle will go further and faster that what I usually can. It happens on both left and right hand movements. I further tested in and it seems to do the same on the y axis as well. To further my testing I realized it also does it diagonally. I have seen the older posts (2014ish) with people seeing a higher sensitivity going only left. I have had zero luck trying to track down the issue from previous posts or articles. Any help would be kindly appreciated.