NO, this will not give you an advantage I'm the game, am am simply teaching you guys how to remove the rotors from the controller. This was my project in product design: a controller that made Destiny actually fun to play. Materials you will need: Sewing machine or manual sewing kit Pair of boxers or underwear and matching fabric Soldering gun with solder Insulated electric wire (doesn't matter what gauge as long as it's thin) One spare controller of whatever console you own. (you may destroy one in this process) Ping pong balls. Epoxy Procedure: Step 1: carefully disassemble your controller and examine the circuitry. Find the connections that supply power to the tumblers. Step 2: carefully remove as many tumblers as you can without damaging the circuitry. You will have to find a way to sever the rotors from the connection. Don't worry, these will be reconnected with wire. Step 3: cut 2 or 3 feet sections of wire, strip the ends, and use solder to weld the ends of the wire to the rotors and their previous connections. Step 4: take each ping pong ball, drill a 3 mm hole on one end. Then cut the ball in half, making sure the hole is also halved. Place each rotor inside one of the halves, use epoxy to bond it to its walls, only after making sure the wire is lined with the hole, and making sure the wire does not get in the way of the rotor's path. (additional epoxy may be required) Step 5: after the epoxy has settled, place the ping pong halves back together and seal with epoxy. Step 6: take the boxers/underwear, lay them on a flat surface front side down. Step 7: carefully arrange the ping pong balls in a symmetrical pattern around the crotch region in the front, making sure the cords come out of the top of the underwear/boxers. Step 8: carefully cut out whatever size pieces of fabric you may need to cover the ping pong balls. Sew the fabric to the underwear to create little "pockets" for the ping pong balls to rest in. Be careful not to damage the wire. Step 9: drill whatever holes you need in the controller casing to allow for the wires to connect the controller to the rotors. Step 10: reassemble the controller. Step 11: put on the underwear, start Destiny up, and enjoy a much more pleasurable experience. This will make those raids so much more enjoyable, especially all of those exploding thralls. I hope this helps. It's how I played. :) Note: its better if you turn your microphone off, otherwise you might irritate other people.