this is the easiest way to assemble it and everything in spoilers is something i learned the hard way so have a good laugh at that [url=http://imgur.com/gallery/0iicKd8]also check ur mobo manual[/url] inside case 1 install io shield 2fans/aio coolers 3 psu 4 cable routing 5 make sure standoffs are currently placed for ur mobo outside case 6 install ram[spoiler]make sure they're spaced and in dual channel slots[/spoiler] 7 m.2 slots[spoiler]storage should probably come with a heat spreader, its not a sticker! [/spoiler] 8 cpu and cooler[spoiler]make sure there's no sticker on the bottom of ur heat sink and u have thermal paste[/spoiler] inside case 9 mobo installation[spoiler]an adapter for ur screwdriver to fit the screws is probably in the mobo box in a bag[/spoiler] 10 plug everything in/ install not m.2 things 11 absolute last step is putting in graphics card and plugging it in[spoiler]if it's any modern card you should remove the port slot below the main one too because the card will exaust out the back, and plug ur moniter into the gpu not the mobo, and when ur removing the gpu remember there's a plastic clamp hidden under it locking its place[/spoiler] also remember to overclock ur ram in the bios and set your moniter refresh rate in windows, and tune ur graphics card! [spoiler]5700 xt is most stable at 2000 freguency, 1060-1100 voltage, power limit +50%(maxed) and my dram is around 1800 i can't reccomend this [url=https://youtu.be/LyIaxuppBAI]software[/url] enough! look up temp limits for ur parts and make some fan curves! install a new driver manually not through gpu software. [/spoiler]

Best of luck!

Don’t rig it to explode. My cousin once did it to his dads. He had to pay for all of it.