{{
`${userDetail.user.displayName}${userDetail.user.cachedBungieGlobalDisplayNameCode ? `#${standardizeBungieGlobalCode(userDetail.user.cachedBungieGlobalDisplayNameCode)}` : ""}`}}
{{getUserClans()}}
Edited by sage_dastullo:
12/7/2014 2:10:12 AM
9
[quote]I'm aware the Xbox guys are having problems, but I can't seem to find anyone posting about problems on PS4/PS3.
I've been getting error codes non-stop after the latest update on PS4. My speeds and ping are just fine, but I can't stay in patrol, story missions, or crucible because of these errors. I was wondering if it's really something on my side or if it's on Bungie's. I'm just asking since I feel like I'm alone on this.[/quote]
I was having the same issue. I played around with the router settings a bit and it worked eventually. I don't know whether to attribute it to Destiny fixing a problem, or the change to my NAT settings.
English
-
Me to had a ton of error codes and a new one just kingfisher can't play 20 min before I get kicked had no problems before the dlc
-
What worked for me was hardwiring a connection to the router. Then I reset the internet connection for the ps4 to LAN. No error codes or kicks since. I found with three other people using Wi-Fi I would get kicked a lot. I suspect their error checking might be too tight. Good luck.
-
I had the opposite. I was hardwired and it wouldn't work then I went wireless.
-
And that worked for you?
-
I'll try having a look at my router settings, but all the tests I've run show my NAT as Type 2, so it should be fine. I really hope they push another update out before the new raid :|
-
You're still having problems? What I ended up doing was setting my PS4 as a DMZ host. And restarted the modem and PS4. Seemed to fix the problem. I tried port forwarding and it never helped. So I took the extreme route.
-
DMZ didnt work for me. I did literally everything on help section, lol. I'm waiting on an ISP crew to come check the lines. It's the last resort. After that, no destiny I guess...
-
I opened the ports for PS4 just now. Is there anyway to test if they're opened correctly?
-
I wish I knew. Couldn't find anything that seemed legit.
